Children's plastic chair: types and features

If chairs for adults are intended only for seating, and are often focused on the person as a whole, and not only on their owner, then high chairs are available in a huge variety of options, including - with a focus on some special needs of the child, as well as - given that he is small, but constantly growing.

Possible materials for the manufacture of such furniture can be many, but most of the parents believe that it is a children's plastic chair will be the best solution. There is a suspicion that such a statement is very close to the truth.

In modern society, there is a perception that natural materials are differently better than modern industrial chemistry. On the one hand, it’s stupid to argue with this, on the other - some types of the same plastic are quite safe even for children, and at the same time they have a number of characteristic advantages that make them prefer them.

In particular, for the production of children's furniture are used chemically resistant, and therefore non-toxic, types of plastic - polyvinyl chloride, polypropylene and polycarbonate. The same chemical resistance it helps not to be destructive of aggressive substances (the same detergents) and does not absorb pollution.

Thanks to water resistance the product is washed at any time and dries very quickly, and the fact that the dirt is not absorbed into the surface, allows you to scrub the chair even when similar furniture from any other material just had to be thrown away.

Among other things, the plastic stool weighs very little, which is useful both for transporting it by adults and for the safety of the baby - even if the construction falls on the child, it only scares him, but does not hurt him.

Plastic is a material that allows for an incredible variety of shapes and colors. It is extremely easy to make a construction of it, which resembles not a regular chair, but a royal throne. The brightest tones look quite appropriate if the product is made of plastic. Some design solutions require decorative elements made of expensive wood or stone - a plastic chair may look like it is made of these materials.

In this case, we must not forget that withThe cost of plastic is in many respects lower than the rates for other materials. for the production of children's furniture - first of all, metal and wood. A kid in a family is always a huge expense, so many families will gladly take advantage of the chance to save, if this does not lead to a loss of quality.

Of course, there is not a single material completely devoid of flaws, and plastic also has them. He is most criticized for relatively low strength and durability - Products made of it are quickly deformed or broken, but at the same time the high chair hardly assumes that it will be used for decades.

It should also be recognized that some types of plastic are still toxic, but this is usually determined by a rather simple way: harmful chemistry often has a sharp, unpleasant odor.

A variety of plastic children's chairs is so great that there is a risk that even the longest list does not fit all varieties without exception. Our list probably will not be absolutely complete either, but at least we have included all the most basic types of such furniture here.

It is not very clear why such a product is called just a chair, because in fact it is more like a cradle. As for the second part of the name, it is obtained due to the great similarity with the more familiar rocking chair, which allows a certain amplitude of wiggle.

The design of this type is designed, of course, mainly for babies and is designed to greatly simplify the lives of young mothers who may have other really important concerns, in addition to the many hours of rocking the restless baby. In some cases, the device may also have an electric drive in order not to require direct participation of adults at all.

This is a whole family of special chairs, the key feature of which is the presence of side and front sides, a belt fixation of the child, and a small tray in front, optimally suited for ease of feeding the baby. The design of the tray usually provides protection against spillage of liquids and a special holder-recess for the cup.

Structurally, such a high chair can resemble the one intended for feeding, however, the working conditions are completely different - it is installed in the bath for the time of bathing and ensures that the child will stay in place and will not be completely under water, freeing his mother's arms. Because of the nature of his position, he is usually devoid of legs, but it involves a special sucker, with which it is attached to the walls of the bath.

At the same time there is also a tray, which is used mainly for games. Because of the constant presence in the water column, these chairs are the only ones that are made exclusively of plastic.

Actually, nothing unusual - an ordinary chair, quite reminiscent of an adult, only greatly reduced in scale.

Another obvious analogy with "adult" chairs, with the difference that in unused form the product can take up much less space than in the unfolded state. This greatly simplifies the storage and transportation of the chair, which you can easily take with you to the cottage or on a visit.

This is a special type of high chair designed exclusively for children, although a somewhat similar adjustment pattern is used in many office chairs. Such a construction initially assumes that its owner will grow quite quickly, so it’s not easy allows you to adjust the height of the seat, but also has a good dozen of the stipulated provisions that allow you to switch among themselves without any effort.

Such a solution, perhaps, is not quite optimal for working out a correct posture, but at the same time it significantly overtakes classical chairs in convenience, which would have to be picked up for weeks, and changed — literally every couple of months.

Actually, as soon as they are not called - computer, work, office, adjustable, and so on. The point is in the maximum possible regulation of the position of as many parts as possible, including the height of the seat and the position of the back, as well as the height of the footboard, if any. Such furniture is able to adapt to any slightest features of the build of its owner, therefore, with careful adjustment, it simply cannot contribute to the deformation of the spine and posture.

Such a product is as expensive as possible.but its term of service may be generally unlimited if it even theoretically provides for the use of an adult.

Each type of plastic baby stool is designed to perform its specific tasks, so the criteria for selecting the appropriate model can vary significantly. At the same time, there is Some features that children's chairs should differ a priori - regardless of the purpose for which they are purchased:

• safety and reliability. Parents usually focus on how safe the plastic from which the product is made, but this is not the end of the danger. It is necessary to check whether the product will withstand the weight and indulgence of the child with confidence, as well as to assess the likelihood of slipping of the baby sitting on such a chair. If the product is bought for preschoolers, the presence and reliability of the fixings may be an important factor - for example, the belts should be only five-point;

• possibility of adjustment. Adjustable children's chairs are a concern not only for the maximum comfort of the child at any stage of his life, but also a direct contribution to the formation of his normal posture. Too large and too small chairs will lead to the formation of postural disorders and further, already deeper, health problems, so the chair should always correspond to the current dimensions of the baby. Since constantly changing children's furniture is difficult both physically and morally and financially, it is worth choosing a model that easily adapts to changing requirements.
• roundness of forms. There is a general rule that any children's furniture should be devoid of sharp endings, because children's activity in combination with an ill-conceived form can be the cause of injury. Although the requirement seems logical and obvious, there are still models where this rule is not respected.

The very first rule that must be followed to make a successful purchase: you need to have a clear idea of ​​what to buy before going to the store. If you are going to buy “some children's high chair”, then it is “some” that you will buy, so you need to think about what purpose it is needed - for example, for feeding, or for the child to sit on it at a table.

Again, think about how old your child is and how much it weighs now, and also how many years you plan to use the purchase, and what will be the parameters of the owner of the small chair then. You may not have any concrete idea about the modern assortment of such products, but if you have a formulated wish, you have a higher chance of getting sensible advice from a store employee.

It is important to remember that the chair is not chosen for the parents, but for the child, and it is his convenience that plays a key role, therefore, it is not out of place to take the baby with you, and consult about what he wants. Let him try to sit still in the store on the intended purchase and only then make up an opinion on each option.

Finally, if after all the screening stages there are still a few suitable options, do not rush to choose the cheapest - the reason for cheapness may not please you. Focus on proven brands - consumers mark the quality of Plastika, Peg Perego, Eames, Chicco, Tatamia, Ikea, Stokke, Kapella, Graco, Babyton, Appetite brands.

For information on how to choose a highchair, see the following video.